Monday 8 August 2016

Sticking Down the Buffer Stops

An extra visit to Aire Valley RMC meant I could sort out the various items stored under the layout and also, after preparing the goods yard area for them on a previous visit, stick down the buffer stops for the good yard and Brookes sidings



The buffers were all made to the L&Y pattern by Chris Arthur a while ago, however to fit them in the goods yard some plaster that was laid down at the end of some sidings needed removing, as per this slightly fuzzy photo from April -

When the photo was taken, the buffers were not stuck down whilst the plaster was removed and some pieces of plastikard adjacent to the sidings were trimmed.

Here's a view of the buffers now glued in place...



This is the view from the road, even at this early stage with the scenery there's just something about a line of sidings abutting onto a road like this -





The buffers for Brookes sidings have been done too -

  

The next PAG meeting is on Saturday 13th - jobs for this meeting include installing extra bus bars under the Halifax line and checking that the newly installed buffer stops don't short anything out in the sidings. Hopefully we should also be able to start on landscaping as well.

2 comments:

  1. Well, we sorted out under the layout. Must remember that we need a new, leak-proof, bag for the chinchila dust for the ballasting.

    ReplyDelete
  2. On the 13th further progress was made with the wiring. I believe that the single slip now works fully but we ran out of time to test it properly and the Brooks sidings need wiring too, to be able to test it fully.

    ReplyDelete